The home of innovative and mobile diagnostics

SOMNOscreen® HD – Home Sleep Testing (HST)



A third smaller than the SOMNOscreen® plus, the new power-house SOMNOscreen® HD offers excellent signal quality of up to 4 kHz sampling rate per channel. The high-resolution touchscreen allows a simple and intuitive operation.  In addition, the signal- and impedance-controls can be seen directly on the display at the patient’s bedside. 

Couple these features with our Home Sleep Camera is a ground breaking solution for synchronous video in an ambulatory setting – especially where reimbursement demands video e.g. for adult ambulatory polysomnography or using it as mobile polysomnography in a hospital environment where you need synchronous video, but can’t have online recording due to network restrictions.


Excellent Signal Quality

PSG System with Up to 70 channels
4kHz sample rate with 24 Bit resolution

Intelligent Connect™

Automatic sensor & electrode recognition – making montages a thing of the past

HD Touch Screen

Allows PC Independent set-up, bio-calibration & impedance check at the bedside

Shortest EEG Electrode with Continuous
Impedance Check

Lower noise, higher signal quality & with confirmation of proper electrode hook-up during and after study

Remote Signal Check

Transfers the measured data, as a screen shot, to your tablet, PC or smart phone for instant signal check.

Synchronous video in an home
sleep setting

Innovative Video Solutions – Why not make every room a sleep lab?



The future is here – our most powerful and flexible sleep diagnostic system. The SOMNOscreen® HD is a new generation of PSG with 55 channels (10 internal, 28 external, 17 EXG via the headbox) which can be upgraded to 70 channels, they are recorded at a resolution of up to 4 kHz per channel. Excellent signal quality goes without saying.

With intelligent connect, the new montage free sensor recognition, you can connect any sensor to any slot and also change it during the measurement. If an installation on the PC has been selected before the cable is connected, the device will indicate any missing sensors. Incorrect measurements due to forgotten or incorrectly connected sensors are thus excluded. Even without assembly, the measurements can now be started directly on the device.

Thanks to the integrated data transmitter, the SOMNOscreen® HD allows additional  remote signal control of the measured data: You get a screenshot of the measured data on your smartphone, tablet or computer. This way, you always know whether a patient’s home measurement is working properly, giving you peace of mind. In addition, the measurement is saved on the memory card of the SOMNOscreen® HD – no data is lost!

Adding video to this powerful device gives you new opportunities to offer the future of HST.

Compact Home Sleep Testing Device

  • 17 Channel Headbox with 12 EEG/EOG, Ground, Reference, Continuous Impedance, 2 EMG
  • 2 PLM
  • Pressure (Flow & Snore)
  • Flow Thermistor
  • Effort (Thorax / Abdomen)
  • Intercostal EMG Efforts
  • SpO2, Pulse rate
  • Body position
  • Movement (Sleep / Wake Determination)
  • CPAP/BiPAP – Pressure
  • Microphone

Intelligent Connect™

The new Intelligent Connect technology simplifies your day-to-day work in the sleep lab by automatically recognizing which sensor has been attached.

This allows the plug-in slots for the sensors to be freely selectable and sensors can even be changed or added during the measurement.  Faulty measurements, due to incorrectly attached sensors, are now a thing of the past.  If a montage is selected on the PC before the sensors are attached to the patient, the device will show an optical signal that a sensor may be missing.

Even without a pre-set montage, the sensor measurement can be started directly from the SOMNO HDTM– simply plug in the desired sensor and begin the measurement.

Docking station for simplified handling

The docking station is used to download the measurement data, charge the SOMNO HD Li-Ion battery and to install regular, free of charge firmware updates as long as you are connected to the internet. This means your SOMNO HD can be always up to date.

A virtual docking station also appears on your PC and shows the actual status of the device and the battery.

Of course, the SOMNO HD ™, like the other SOMNOmedics devices, also offers real-time telemetric data transfer to the PC or tablet PC. In addition, the measurement data is saved on an internal memory and can be transferred at the end of the night via the docking station. So no measurement is lost.

Optional Video

The Mobile camera includes:

  • Tripod, case
  • Power supply
  • Built in Infrared-illumination
  • Video resolution of 800 x 600 pixel, in the H.264 format
  • Audio
  • Record up to 90 hours of video.
  • It’s small in size (137 x 124 x 71 mm) and light at only 460 g.
  • The accuracy of the synchronization between recorded data and video is ± 1 second

In the software the following can be achieved:

  • Synchronous play to physiological data.
  • Selectable speed (stepwise between 0.25 and 100x) with loop option.
  • 150 MB/h video size

Home Sleep Test Video Workflow

  1. Initialise a recording with SOMNOscreen® HD and the Home Sleep Camera.
    Both devices need to be connected to the same PC: The SOMNOscreen HD via its docking station, and the Home Sleep Camera via LAN cable.
  2. Give SOMNOscreen® HD and Home Sleep Camera to the patient.
  3. Patient set up camera at home in the evening: Assembles the tripod, connects to a power supply. The video recording will start automatically
  4. Patient packs up the video and tripod and gives the whole package back to the physician
  5. Transfer recording including video. Both devices need to be connected to the same PC: The SOMNOscreen HD via its docking station, and the Home Sleep Camera via LAN cable.

Optional Online signal check on a tablet or PC

Transfers the measured data to your tablet, PC or smart phone for instant signal check – right at the patients bedside or mobile as a screenshot. Transfer times and periods can be programmed individually.

Data analysis and report

  • Analysis of all standard signals according to latest AASM standards
  • Computer aided sleep staging with self-learning, user specified thresholds for each patient: fast & accurate analysis – 80% time saving, validated
  • Computer aided analysis of cortical & autonomous arousal
  • Sleep fragmentation based on cortical arousal, pleth and PTT changes
  • Correlation of respiratory events with desaturations, changes in heart rate and arousal’s
  • Snoring topography for localization of snoring source
  • Flow Limitation – obstruction level analysis
  • Flow detection during PAP therapy based on miniaturized pneumotachograph
  • Graphic based montage editor
  • Unlimited Customized reports and Form letters, Sample Epochs added to final report
  • Flexible individual screen layouts, customized Keyboard shortcuts
  • Reanalysis at any time
  • MSLT and split night reports
  • Inter-Scorer variability
  • Archiving to CD/DVD or network drive
  • GDT and HL7 interface
  • Export of data in MS Excel, SPSS, EDF+ and ASCII, Import of data in EDF+
  • Export of whole case in self running file
  • Video editing
  • Calendar with SOMNO scheduler
  • User manager for the assignment of access rights and automatic tracking

Please visit our dedicated software page for more information.


Our devices are only as good as the reports that are produced. That is why our sleep diagnostic reporting tool is powerful and configurable. To see a sample report please click below where you will be able to see full report.



SOMNOmedics news and media? have a question? want the latest press release?


Please email or talk to one of our international sales advisors on +49 931 35909 40.